Go to Top

DTMF Display

DTMF Display Kit

3 input configurations

2 line x 16 character display included

Low power

In Stock

 

 

dtmf_display_2x16

Buy This Item

£17.99

Details

The PCB has been designed to allow 3 input configurations: unbalanced audio, an Electret microphone or balance audio to be connected. When an Electret microphone is connected it can pick-up tones from a speaker phone a few inches away.

Display

Our DTMF Display kit can display up to 32 characters (16 per line). The display can be cleared by a button (not supplied) or can auto clear on a timed basis from receipt of the last character.

The kit is supplied with a backlit display, a 220 ohm ½ watt resistor (ideal for 12-14V supply) is included on the PCB and a jumper enables the backlight.

Connecting a momentary on button between the button input pin and 0V pin clears the display on pressing, however holding the button during power-up enables the timed reset mode. In timed reset mode the display is automatically cleared 10 seconds after the last character is received.

Runs from 7 to 16V DC at a few mA.

DTMF Display Video

What's in the box?

Complete kit of parts includes a pre-programmed PIC micro, gold plated PCB, LCD display, and nuts/bolts/spacers. This kit is supplied with a backlit display, a 220 ohm ½ watt resistor (ideal for 12-14V supply) is included on the PCB and a jumper enables the backlight.

Downloads

pdf_symbol[1]Download DTMF Display kit PDF     

 

pdf_symbol[1]Laden Sie DTMF-Display Bausatz PDF

 

pdf_symbol[1]HT9170 datasheet

 

pdf_symbol[1]Amateur Radio TNC connector to DTMF wiring information

you may also like

DTMF Encoder kit

DTMF Encoder

Encode all 16 DTMF tone pairs directly from a keypad as well as 8 single tones.

View item

8 output DTMF Decoder kit

4 on board BT47 style 12V relays and 4 open collector outputs

View item